 |
|
|
||||
| Pricing | ||||
| Model | Description | List | ||
| VX-4000LA PKG-1 MH-25B7A | VX-4000 Series Mobile 70W 29.7-37MHz 250CH w/MH-25B7A | $625.00 | ||
| VX-4000UD PKG-1 MH-25B7A | VX-4000 Series Mobile 40W 450-490MHz 250CH w/MH-25B7A | $641.67 | ||
| VX-4000VC PKG-1 MH-25B7A | VX-4000 Series Mobile 50W 148-174MHz 250CH w/MH-25B7A | $591.67 | ||
| Accessories |
||||
| Model | List | |||
| Alignment/Service Related | ||||
| CT-88 |
The CT-88 cable is used in conjunction with the FIF-8 box to make adjustments to the alignment. This is for the VX-4000/VX-5500/VX-6000 mobiles. The CT-88 connects from the DB25 accessory port of the mobile, to the FIF-8 box interfaced to your PC. |
$55.00 | ||
| FIF-8 |
Firmware Writer. Unit comes with a cable for the muli-pin radios (VX-900, VX-4000, etc.). Please order the CT-92 cable for firmware updating of modular connector radios (VX-3200, VX-4200, VXR-9000, etc.). Powered by a PA-23B (not supplied). |
$188.00 | ||
| Control Head | ||||
| CNT-4000 | Control Head (extra control head needed in Dual Head configuration. Also, requires T9206985A for dual head remotes.) | $175.00 | ||
| CNT-5000 |
Compact motorcycle control head for the VX-4000, VX-5500 and VX-6000 mobiles. |
$499.00 | ||
| Cover plate | ||||
| RMK-4000B | Cover plate for the RF Deck in Remote Applications | $65.00 | ||
| RMK-4000H | Cover plate for the Control Head (Includes mounting bracket and hardware) | $105.00 | ||
| RMK-5000B |
Dedicated Motorcycle Control Head. Built for ease of use and all weather operation. |
$179.00 | ||
| DC cables | ||||
| CT-96PS Ignition Sense Cable | Ignition Sense Cable for the VX-4000, VX-5500 and VX-6000 mobiles. | $18.33 | ||
| E-DC-22 |
30 ft DC cable for VX-4000/-5500 mobiles. |
$80.00 | ||
| DC Noise Filters | ||||
| LF-1 | Plug-In Line Filter | $35.00 | ||
| Microphone | ||||
| MD-11A8J/4000 | Desk Microphone | $114.00 | ||
| MH-25B7A | Vertex Mobile Microphone (Supplied w/radio) | $56.00 | ||
| MH-53A7A |
The MH-53A7A is a Noise-Canceling Microphone . |
$103.00 | ||
| MH-53A8A |
Heavy Duty Weatherproof Noise Canceling DTMF Microphone for the CNT-5000 remote Control Head. |
$149.00 | ||
| MH-53B7A |
The MH-53B7A is a Noise-Canceling Microphone with DTMF keypad. |
$163.00 | ||
| MH-53C7A |
The MH-53C7A is a Heavy Duty Microphone . |
$105.00 | ||
| Mounting Bracket | ||||
| MMB-75 | Mobile Mounting Bracket ( Supplied w/radio) | $25.00 | ||
| MMB-76 | Locking Mobile Mounting Bracket | $75.00 | ||
| MMB-88 |
This is a
mounting bracket, which is a base plate for the CNT-5000 and
MLS-200. The MMB-88
mounts to a motorcycle. The CNT-5000 and MLS-200 then mount
to the MMB-88, side by side.
|
$79.00 | ||
| Power Supply | ||||
| FP-1023 | External Power Supply 23 Amp | $216.88 | ||
| Programming and Installation | ||||
| CT-105 |
FIF-10 to VX-530/600/800/900 Cable |
$60.00 | ||
| CT-70 | Radio Programming Cable (Requires VX VPL-1 Cable) | $63.00 | ||
| CT-72 | Cloning Cable (Set-to-Set Clone) | $68.00 | ||
| FIF-10A | FIF-10A USB Interface for PC programming. Check specific models for additional cable pigtails. Pigtails not included. | $150.00 | ||
| INST-OPT | Installation Charge. | $53.00 | ||
| PROG/ADD | Factory Radio Programming (Each additional channel after 1st) | $6.00 | ||
| PROGRAMMING | Factory Radio Programming (single channel only) | $50.00 | ||
| VX MPI | Programming Kit for the MDC1200 and the FVP-35 | $263.00 | ||
| Remote Cable | ||||
| CT-81 | Remote Cable for RMK-4000 series (20 ft) (RF Deck to Control Head) | $90.00 | ||
| CT-82 | Remote Cable for RMK-4000 series (8 ft) (RF Deck to Control Head) | $80.00 | ||
| CT-83 | Remote Cable for RMK-4000 series (2 ft) (RF Deck to RF Deck) | $70.00 | ||
| CT-93 | Remote Cable for RMK-4000 series (30 ft) (RF Deck to Control Head) | $96.34 | ||
| Signaling | ||||
| CN-6 | Connector Board (to be used with the installation of third-party options.) | $16.00 | ||
| F2D-8 | Two-Tone Decoder. (requires FIF-7 if used on the VX-4000 / VX-5500 / VX-6000) | $102.00 | ||
| F5D-14 | Five-Tone Enc/Dec Unit. (requires FIF-7 if used on the VX-4000 / VX-5500 / VX-6000) | $202.00 | ||
| FIF-7A |
Interface Board (for VX-4000 / 5500 / 6000 with FVP-25, FVP-35, F2D-8 & VTP-50 option boards)
Replaces the FIF-7 |
$37.00 | ||
| FVP-25 | Encryption Unit (Band Inversion Type) and DTMF Paging. (requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000) | $118.00 | ||
| FVP-35 | Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming | $346.00 | ||
| MDC1200 | MDC1200 ANI Encoder. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming. | $125.00 | ||
| VME-100 | The VME-100 is a plug-in ANI encoder capable of encoding MDC1200, GE Star or DTMF ANI per channel. | $99.95 | ||
| Speaker | ||||
| MLS-100 | External Speaker (12 Watt Peak) | $62.00 | ||
| MLS-200 | 12 W peak external weatherproof speaker. | $89.00 | ||
>
